محصولات ما

برجسته محصول ترکیب

طیف گسترده ای از تجهیزات تبرید باکیفیت ما را که برای کاربردهای صنعتی و تجاری طراحی شده اند، کاوش کنید.

IP55 Cabinet Air Conditioner

Weatherproof cooling for outdoor enclosures · IP55 rated · -40°C to 55°C · 1500W-3000W

IP55 -40°C R454C 230V
2200 W
Cooling capacity
IP55
Enclosure rating
-40°C
Low ambient startup
56 dB
Sound level

This IP55-rated air conditioner is designed for outdoor cabinets where protection against dust ingress and water jets is essential. The unit delivers 2200W of cooling at 35°C ambient with a heavy-duty scroll compressor and corrosion-resistant microchannel condenser. The IP55 enclosure provides protection against damaging dust deposits and low-pressure water jets from any direction.

The system operates reliably from -40°C to 55°C ambient with integrated crankcase heaters and low-ambient control logic. The galvanized steel enclosure with polyester powder coating and stainless steel fasteners ensures long-term durability in outdoor environments. Modbus RTU communication enables remote monitoring and integration with site management systems.

IP55 Specifications
Power supply 230V AC / 50Hz
Rated current 7.2 A
Refrigerant R454C / 1020g
Airflow 720 m³/h
Dimensions 880×620×300 mm
Weight 54 kg

Dust Ingress Protection IP55 rating ensures protection against harmful dust deposits. All intake and exhaust vents are fitted with fine mesh filters that prevent airborne particles from entering the cabinet.
Water Jet Resistance Protected against low-pressure water jets from any direction. All seams are gasketed and sealed with silicone. Drainage channels direct water away from critical components.
Wide Temperature Operation Operates from -40°C to 55°C ambient. Crankcase heater for low-temperature startup. Hot-gas bypass for evaporator pressure control in cold conditions.
Corrosion-Resistant Construction Galvanized steel with 120µm polyester powder coating. Stainless steel fasteners. Condenser coil with electro-deposition coating. Salt spray tested 1000 hours.

Scroll Compressor High-efficiency scroll type with 10-year design life. Internal thermal protection and vibration isolation. Crankcase heater for low-temperature startup.
Microchannel Condenser Aluminum microchannel coil with corrosion-resistant coating. EC fan with automatic speed control based on head pressure.
Digital Controller LCD display with keypad. Supports setpoint 5-50°C. Alarm history stores last 50 events. Modbus RTU communication standard.
IP55 Enclosure Heavy-gauge galvanized steel with powder coating. Sealed cable glands and gasketed access doors. Sloping top prevents water accumulation.

Electrical & Cooling
Cooling capacity (35°C) 2200 W ± 4%
Operating range -40°C ~ 55°C
Power supply 230V AC, 50Hz
Rated current 7.2 A
Refrigerant / charge R454C / 1020 g
Mechanical & Environmental
Enclosure rating IP55 (IEC 60529)
Sound pressure (1m) 56 dB(A) @ 25°C
Evaporator airflow 720 m³/h
Condenser airflow 1100 m³/h
Dimensions (H×W×D) 880 × 620 × 300 mm
Weight 54 kg

01
Outdoor Telecom - Telecom base station cabinets and network shelters requiring protection against rain, dust, and road spray.
02
Roadside Infrastructure - Traffic control cabinets, surveillance equipment, and intelligent transportation systems.
03
Industrial Outdoor Sites - Oil and gas, mining, and heavy industrial equipment enclosures in outdoor locations.
04
Renewable Energy - Solar inverter cabinets, wind turbine control panels, and battery storage enclosures.

IP55 provides protection against dust ingress sufficient to prevent harmful deposits, and protection against low-pressure water jets from any direction. This makes the unit suitable for outdoor applications where rain, road spray, and dust are present.

The unit operates down to -40°C ambient. The crankcase heater pre-warms the compressor oil, and the controller uses low-ambient control logic to prevent evaporator freeze-up. Hot-gas bypass maintains proper evaporator pressure in cold conditions.

The galvanized steel enclosure with 120µm polyester powder coating and stainless steel fasteners provides corrosion resistance for outdoor and coastal environments. The condenser coil features electro-deposition coating for additional protection.

Inspect air filters every 2-3 months in dusty environments. Clean condenser coil quarterly with low-pressure water or compressed air. Check enclosure seals annually. Refrigerant circuit inspection is recommended every 2 years.

Yes. The unit includes mounting flanges for wall or pole installation using M12 bolts. Optional pole-mount brackets are available. Maintain minimum clearance of 300mm on intake and 500mm on exhaust sides.

The unit operates continuously up to 55°C ambient. Above 50°C, the controller modulates compressor speed to maintain cooling performance within safe limits. Capacity is derated by approximately 5% per 5°C above 45°C.

دسته بندی محصولات

کامل تبرید نمونه کارها

طیف گسترده ای از تجهیزات تبرید صنعتی - استاندارد و سفارشی

کابینت فضای باز AC

خنک کننده مقاوم در برابر آب و هوا برای محوطه های بیرونی و پناهگاه های مخابراتی

IP54

کابینت داخلی AC

کنترل آب و هوای دقیق برای کابینت های الکتریکی داخلی و تابلوهای کنترل

فشرده

چیلر هوا خنک

سیستم های هوا خنک کارآمد برای پلاستیک، لیزر، مواد غذایی و صنایع مختلف

صرفه جویی در انرژی

چیلر آب خنک

چیلرهای صنعتی آب خنک با عملکرد بالا با COP برتر

راندمان بالا

چیلر جعبه ای هوا خنک

چیلرهای جعبه ای فشرده و آماده برای استفاده با هوا خنک برای بارهای کوچک تا متوسط

plug & play

چیلر باکس آب خنک

چیلرهای جعبه ای خنک کننده آب با صرفه جویی در فضا با پمپ و مخزن یکپارچه

یکپارچه شده است

چیلر یکپارچه

راه حل های خنک کننده یکپارچه با کنترل هوشمند و نظارت از راه دور

اینترنت اشیا آماده است

چیلر پیچی هوا خنک

کمپرسور پیچی سنگین، هوا خنک - برای کاربردهای صنعتی بزرگ

وظیفه سنگین

چیلر پیچی آب خنک

چیلرهای پیچی آب خنک با ظرفیت بالا برای کار مداوم

قابل اعتماد

چیلر خنک کننده تبخیری پیچی آب خنک

خنک کننده با کمک تبخیر برای حداکثر کارایی در آب و هوای گرم

اکو

مبدل حرارتی آب

مبدل های حرارتی صفحه، پوسته و لوله برای کاربردهای مختلف فرآیندی

سفارشی

اتاق ماشین AC

تهویه مطبوع دقیق برای مراکز داده، اتاق سرور و مخابرات

24/7

برج خنک کننده

برج های خنک کننده مدار باز و بسته برای دفع حرارت صنعتی

FRP

سفارشی سازی حرفه ای

راه حل های سفارشی - از طراحی تا ساخت، برای نیازهای خاص شما

سفارشی
ISO 9001 · دارای گواهینامه CE

شانگهای سونی شرکت تجهیزات تبرید، با مسئولیت محدود

یک شرکت بزرگ تا متوسط با فناوری بالا که تحقیق و توسعه، تولید را ادغام می کند و فروش. حمایت کردن "یکپارچگی، کیفیت، خدمات و نوآوری" - ارائه راه حل های خنک کننده قابل اعتماد به جهان.

11+
کشورهای صادرکننده
200+
پروژه های تحویل شده
19+
سالهای نوآوری
100%
رضایت مشتری
راه حل های سفارشی
2007

مهندسی تعالی در تبرید

شانگهای سونی با چشم اندازی برای تبدیل شدن به یک تاسیس شد leading force in the refrigeration industry. We are China IP55 cabinet air conditioner Manufacturers and Custom IP55 cabinet air conditioner Suppliers. Today, we are a renowned brand در کولرهای کابینتی و چیلرهای صنعتی، شناخته شده توسط حرفه ای در سراسر جهان

ریشه در بازار چین دارد، ما راه حل های تبرید قابل اعتماد ارائه می دهیم به مشتریان در سراسر جهان - از محصولات استاندارد تا حرفه ای سفارشی سازی

از محصولات استاندارد تا سفارشی سازی حرفه ای - ما خنک کننده دقیق ارائه می دهیم.

تحقیق و توسعه محور

نقاط شروع بالا، استانداردهای سختگیرانه - نوآوری مداوم

صداقت و اعتماد

مشارکت های بلندمدت مبتنی بر شفافیت و پشتیبانی پس از فروش

کیفیت تایید شده

ISO 9001، CE، و تاییدیه های خاص صنعت در تمام خطوط

ذهنیت جهانی

Serving 40+ countries with tailored refrigeration solutions

ما فقط تجهیزات را خنک نمی‌کنیم، بلکه یک پروژه در یک زمان اعتماد ایجاد می‌کنیم.»

چرا سونی

رانده شده توسط کیفیت & نوآوری

متعهد به ارائه برتری از طریق بهبود مستمر و راه حل های مشتری محور

تمرکز تحقیق و توسعه

نقاط شروع بالا، استانداردهای سختگیرانه - بهبود مستمر محصول

صداقت و خدمات

مشارکت های بلندمدت مبتنی بر اعتماد، شفافیت و پشتیبانی پس از فروش

حضور جهانی

ریشه در چین دارد و در سراسر جهان با راه حل های تبرید قابل اعتماد ارائه می شود

کیفیت تایید شده

ISO 9001، CE و تاییدیه های خاص صنعت برای تمام خطوط تولید

استعلام سریع

ما ظرف 24 ساعت با شما تماس خواهیم گرفت.